Click image to view full size image
1:Standard and grade:
It’s ASTM B265 standard and Grade 2 material,equivalent to:
China GB/T |
USA ASTM |
Russia TOCT |
Japan JIS |
Germany DIN |
|
Pure titanium |
TA2 |
Grade 2 |
BT1-0 |
JIS2(TP340) |
Ti2(3.7035) |
2:Chemical Composition:
Grade |
Element and Composition,% |
|||||||
Grade 2 |
N,Max |
C,Max |
H,Max |
Fe,Max |
O,Max |
Residuals,Max each |
Residuals,Max toal |
Titanium |
0.03 |
0.08 |
0.015 |
0.30 |
0.25 |
0.1 |
0.4 |
Balance |
|
3:Mechanical Properties
Grade |
Tensile Strength,Min |
Yield Strength,0.2% offset |
Elongation in 2 in.or 50mm,min,% |
||||||
Ksi |
Mpa |
Min |
Max |
||||||
Ksi |
Mpa |
Ksi |
Mpa |
||||||
2 |
50 |
345 |
40 |
275 |
65 |
450 |
20 |
||
4:Details:
4.1:Size:Thickness 4.75mm~100mm*Width 2500mm max*Length 8000mm max;
4.2:It is manufactured by Titanium sponge;
4.3:The supplied condition is Annealed,Cold rolled;
4.4:Surface treatment is Acid Pickling;
4.5:Ceritificate will be submitted;
4.6:Better tolerance requirements than Standard is available;
4.7:Application:Widely used in:
*Power Generation;
*Marine industry,Sea water;
*Desalination;
*Chemical processing;
*Chlorate manufacturing
*Etc.
5:Melting point of titanium
The melting point of titanium is almost 3135°F(1725°C).It is approximately 2000°F above of Aluminum and 400°F above of steel
6:Packing and Shipping:
All our astm b265 titanium plate in grade 2 will be packed by wooden box,which is kind of seaworthy and airworthy packing.It can be shipped from loading port in China to everywhere abroad by sea or air.
7:FAQ
1)Q:What is the Melting point?
A:.1725 °C around.
2)Q:What is the Boiling point?
A:3560°C approximately.
3)Q:What is the titanium density?
A:4.51 g/cm3..
http://www.chinatitaniums.com/